Terminology answer: Let's talk about the count, which is what we often see 30, 40, 60, etc. For example, 30 friends also call it 30S, that is the same, no difference!
In the end, what is the count? The count is the standard of the thickness of the yarn. For example, one or two cottons can be made into 30 one-meter yarns, that is 30, and one or two cotton can be made into 40 yarns of 1 meter, that is 40; 1 cotton can be made into 60 The yarn of 1 meter long, that is, 60 pieces, is in fact the higher the yarn count, the finer the yarn, the thinner the fabric with such yarn, the softer and more comfortable the cloth.
However, the high count of the fabric requires high quality of the raw material (cotton), and the requirements for the spinning mill and the textile weaving factory are relatively high, so the cost of the cloth is relatively high.
In the industry, cloth is basically not counting, they only talk about ** multiplication, because the choice of the number is very small, generally there are 30S and 40S, and the application of 60S is very small. It can be said that the 60S cloth is not suitable for bedding, because she is too thin! There are not a few factories in China that can be made in 80 pieces of cloth. You don’t think 80 pieces of cloth are small, so expensive, I don’t have I have seen it, I have only heard it, and as far as I know, domestic. Not yet, 80 beds are out!
Common buying mistakes:
Misunderstanding 1: The more the count, the better, the higher the count, the thicker the cloth, the higher the count, the denser the cloth!
Not necessarily, the same density is good for the number of branches, but 60S or more is not for bedding; the higher the density, the denser the cloth; the lower the count, the thicker the yarn, the thicker the cloth!
Myth 2: The cloth of 30 and 40 is very poor.
This is not the case. To know big brands (such as Luo Lai), more than 95% of them are 30 or 40. It can be said that most of the bedding products we see now are 30 or 40, and 20 of them are more. Thick), 60; embroidered and printed, 30, 40, 60 only jacquard, satin, etc., and jacquard is relatively small.
Misunderstanding 3: What technical data is too much to believe! Pursue high and high density!
People may say that it is 60. I can say that it is 80. Who can't talk about it? There are too many people who don't know how to cloth, and can't listen to what it is.
Buying experience talk:
At present, the main product of the market is 40 cotton. If you listen to a business that says you are 60 cotton or even 80, you should be careful. First of all, you have to look at the price, 60 cotton fabrics, the purchase price is basically five or sixty, a four-piece set, with less than 9 meters of cloth, plus manual fees, you calculate, the cost is also five or six hundred, If the monopoly is less than eight hundred, then don't think about it, it must be fake.
If it is 80, then don't believe it, because the more the count, the more delicate the cloth, and the denser the cloth will be. If the cotton cloth is 80, it will be difficult to get wet because it is too dense. It is.
In fact, 40 of the life is enough, the cloth feels very good.